China Demulsifier UBPro-411 for Crude Oil Processing - Top Suppliers from Factory for Enhanced Separation Efficiency
Product Introduction
- UBPro-411 is formed by polymerizing ethylene oxide and propylene oxide in a mixed state under alkaline conditions, using phenol resin, polybasic alcohol, and polyethylene polyamine as starting agents.
- It destabilizes water-in-oil emulsions and serves as an effective component in dewatering and desalting formulations within the oil and related industries.
- It can be mixed with various solvents to produce water/oil soluble final demulsifiers with different active ingredients.
Applications / Functions
- Dilute the demulsifier to a suitable concentration with an appropriate solvent (such as Aromatic Hydrocarbon) before use. Inject it into the end of the pipeline, the inlet line of the combined station dehydration tank, or directly into the dehydration tank with the crude oil.
- To ensure optimal results, a laboratory pilot experiment is required on the demulsifier model before field application.
UBPro-411 has been successfully applied in China oilfields and Southeast Asia. To resolve low-temperature performance issues, methyl alcohol is added to UBPro-411. This lowers the flash point, classifying it as a dangerous good. Our experienced engineers are available to support you; please contact us for more information.
Recommended Handling
- The recommended dosage is 30 to 100 ppm. A pilot test is required to determine the optimal dosage for your specific crude oil system.
- All personnel handling this material must treat it as an industrial chemical, wearing appropriate personal protective equipment (PPE) and observing the precautions described in the Material Safety Data Sheet (MSDS).
Packaging and Storage
- Packaging options: Packed in 200-Liter drums or 1000-Liter IBC (Tote Tanks).
- Storage guidelines: Store in a dry, well-ventilated area. Keep containers tightly closed. Keep away from heat, sparks, and open flames. Store away from incompatible materials. Follow safe warehousing practices regarding palletizing, banding, shrink-wrapping, and/or stacking.
Frequently Asked Questions (FAQ)
What is UBPro-411 and how is it synthesized?
UBPro-411 is formed by polymerizing ethylene oxide and propylene oxide in a mixed state under alkaline conditions. Phenol resin, polybasic alcohol, and polyethylene polyamine are used as starting agents during the process.
What are the primary applications of UBPro-411?
It is primarily used to destabilize water-in-oil emulsions. It serves as a key component in dewatering and desalting formulations within the oil production and refining industries.
How should the demulsifier be prepared and applied in the field?
Before application, dilute the demulsifier to an appropriate concentration using a suitable solvent (such as Aromatic Hydrocarbon). It should then be injected into the pipeline end, the combined station dehydration tank inlet line, or directly into the dehydration tank containing the crude oil.
What is the recommended dosage for UBPro-411?
The standard recommended dosage ranges from 30 to 100 ppm. However, we strongly recommend conducting a pilot test beforehand to determine the optimal dosage for your specific emulsion conditions.
Why is UBPro-411 classified as a dangerous good, and how should it be handled?
To ensure effectiveness at low temperatures, methyl alcohol is added to UBPro-411. This lowers its flash point, classifying it as a dangerous good. It must be handled as an industrial chemical; operators must wear protective equipment and strictly follow the safety precautions outlined in the Material Safety Data Sheet (MSDS).
What are the packaging and storage requirements for this product?
UBPro-411 is packaged in either 200-Liter drums or 1000-Liter IBC tote tanks. It must be stored in a dry, well-ventilated warehouse. Keep containers closed and away from heat, sparks, open flames, and incompatible materials while following standard safe stacking and palletizing practices.